Model	AIR DISPLACEMENT m3/min	DISCHARGE PRESSURE Mpa	MOTOR POWER Kw	DIMENSION LxWxH (mm)	WEIGHT Kg
SH-1.32/20H	1.30	2	15	1300x800x1000	730
SH-1.2/25	1.21	2.5
SH-1.12/30	1.10	3
SH-2.6/20	2.61	2	30	1500x1100x1250	930
SH-2.4/25	2.41	2.5
SH-2.2/30	2.1	3
SH-3.6/20	3.5	2	45		950
SH-3.4/25	3.3	2.5
SH-3.2/30	3.1	3
SH-4.5/20	4.2	2	55	2000x1060x1300	1600
SH-4.2/25	4.1	2.5
SH-4/30	4.0	3
SH-6/20	6.1	2	75		1700
SH-5.8/25	5.5	2.5
SH-5.6/30	5.6	3
SH-8.0/20	8.1	2	90	Air-cooled: 2550x1700x1780 Water-cooled: 2550x1700x1600	Air-cooled:2400 Water-cooled:2200
SH-7.5/25	7.3	2.5
SH-7.1/30	7.1	3
SH-9.5/20	9.2	2	110		Air-cooled:2800 Water-cooled:2980
SH-9/25	9	2.5
SH-8.5/30	8.5	3
SH-12/20	12.1	2	132
SH-11/25	11.2	2.5		Air-cooled: 2800x1760x1920 Water-cooled: 2850x1850x1900	Air-cooled:5100 Water-cooled:4950
SH-10/30	10.1	3
SH-18/20	18.2	2	200
SH-17/25	17.1	2.5
SH-16/30	16.3	3			Air-cooled:5200 Water-cooled:5050
SH-22/20	22.2	2	250
SH-21/25	21.1	2.5
SH-20/30	20.2	3

SHINE middle pressure screw air compressors use full stainless steel screw main machines of our independent research and development, with single-unit compression of no pressurization, and maximum pressure up to 30bar. Main machines use full screw type design, super weight bearings and labyrinth seal to ensure no leakage in main machine under high pressure. The use of built-in oil way lubrication and internal pressure regulation of gear pumps may ensure absolutely safe lubrication of compressor and maximized cooling of the lubricant of compressor. The overall unit uses high pressure cooler and special water cooling to keep air compressor running at low temperature under high pressure, which can greatly lengthen the service life of compressors.
		Heavy-load drive mechanism. The design of dual pressure reduction bearings to make power take-off easier.
		High pressure single-stage compressing main machine, up to 40bar.